Virpil T50CM HOTAS Profiles For FC3

Home > User Files > Virpil T50CM HOTAS Profiles For FC3
DCS: World 2.5
Andere
Virpil T50CM HOTAS Profiles For FC3

Virpil T50CM HOTAS Profiles For FC3

Autor - JD_LincsUK
Datum - 29.06.2019 10:01
Profiles to use with the VPC T50 Mongoos HOTAS - for all FC3 aircraft.

The download includes two profiles for each FC3 aircraft - one for the stick and one for the throttle. The actual devices used were the T50CM2 stick and T50CMv3 throttle - earlier throttles (especially pre-v2) will not be able to use this profile. It also includes 3 diagrams showing the assignments. I have made sure all the aircraft-specific vital inputs are included
I started with Flaming Cliffs 3 because it uses more inputs than the DCS modules, which helps to get to know the HOTAS better, especially in VR, where you can't look!

The only assignments missing are minor game functions - but there are plenty of unassigned inputs that can be used. The profiles were also made with VR use in mind - and so include UI control. Again, these can easily be removed or changed to something of your liking if you don't use VR.

The files can be placed anywhere on your PC, and you can just use the controls configuration panel to browse to where they are and load them into the sim - or you can put them where they go best - in your C:\Users\*****\Saved Games\DCS\Config\Input folder - putting each set in their relevant aircraft joystick folders, e.g: a10-a/joystick

First you need to set the modifiers for each aircraft - pinky on the stick and perky on the throttle. If you don't, the inputs using the modifiers will appear with a reddish highlight in the controller options window. Once you set the modifiers, these will change to the normal colour.

I would recommend then saving them under the USB ID for your computer, so that they will be easily reusable and recognised after a sim reinstall.

The download includes two profiles for each FC3 aircraft - one for the stick and one for the throttle. The actual devices used were the T50CM2 stick and T50CMv3 throttle - earlier throttles (especially pre-v2) will not be able to use this profile. It also includes 3 diagrams showing the assignments. I have made sure all the aircraft-specific vital inputs are included
I started with Flaming Cliffs 3 because it uses more inputs than the DCS modules, which helps to get to know the HOTAS better, especially in VR, where you can't look!

The only assignments missing are minor game functions - but there are plenty of unassigned inputs that can be used. The profiles were also made with VR use in mind - and so include UI control. Again, these can easily be removed or changed to something of your liking if you don't use VR.

The files can be placed anywhere on your PC, and you can just use the controls configuration panel to browse to where they are and load them into the sim - or you can put them where they go best - in your C:\Users\*****\Saved Games\DCS\Config\Input folder - putting each set in their relevant aircraft joystick folders, e.g: a10-a/joystick

First you need to set the modifiers for each aircraft - pinky on the stick and perky on the throttle. If you don't, the inputs using the modifiers will appear with a reddish highlight in the controller options window. Once you set the modifiers, these will change to the normal colour.

I would recommend then saving them under the USB ID for your computer, so that they will be easily reusable and recognised after a sim reinstall.

Please post any questions or suggestions in this thread of the forum:

https://forums.eagle.ru/showthread.php?t=240997
  • Lizenz: Freeware - Freie Version, unbegrenzte Distribution
  • Sprache: Englisch
  • Größe: 503.44 Kb
  • Geladen: 111
  • Kommentare: 0
FOLLOW US