Requires DCS World version 2.5.4 or above!
I-16 - Soviet single-engine monoplane fighter of 1930s created by aircraft designer Nikolai Polikarpov’s design bureau. It was the one of the world’s first fighters with landing gear retraction system. It was I-16 which stood the air fighting against famous Messerschmitt Bf 109.
Over a period of its history I-16 was upgraded a lot. New modifications of aircraft were created and adopted almost every year. I-16 type 24 was further development of I-16 type 18.
It is one of the most famous fighters taking part in World War II. It was different from all its “contemporaries” in configuration and flight characteristics. Its uniqueness and distinction were defined by minimum size, dome-shaped fuselage, small wing, dorsal spine.
Advanced flying model providing excellent simulation of aircraft flight characteristics
Key features of DCS: I-16 by OctopusG include:
Localization:
| Cockpit | English, Russian |
| Radio | English, Russian |
| Documentation | English, Russian |
Free disk space is required: 300 Mb
Minimum system requirements (LOW graphics settings): OS 64-bit Windows 10; DirectX11; CPU: Intel or AMD 3.0Ghz+ with 4+ cores; RAM: 16 GB; Free hard disk space: 200 GB; Discrete video card NVIDIA/AMD 6GB; requires internet activation.
Recommended system requirements (HIGH graphics settings): OS 64-bit Windows 10/11; DirectX11; CPU: Intel or AMD 4.5Ghz+ with 8+ cores; RAM: 32+ GB ; Free hard disk space: 500 GB on Solid State Drive (SSD) + extra space for paid content ; Discrete video card NVIDIA/AMD with 8GB+ VRAM; Joystick / Pedals; requires internet activation.
Recommended VR systems requirements (VR graphics settings): OS 64-bit Windows 10; DirectX11; CPU: Intel or AMD 4.5Ghz+ with 8+ cores; RAM: 32+ GB; Free hard disk space: 500 GB on Solid State Drive (SSD); Discrete video card NVIDIA/AMD from 16GB+ VRAM; Joystick / Pedals / VR; requires internet activation.
This product can be downloaded and installed through the DCS World Module Manager. If you do not have DCS World installed, you can download the DCS World web-installer by clicking this link.
Requires DCS World version 2.8.6 or above!
The F-15E, developed in the mid 1980's, is a dual-role fighter designed to perform air-to-air and air-to-ground missions. An array of avionics and electronics systems give the F-15E the capability to fight at low or high altitude, day or night, and in all weather. The F-15E is the USAF's premier strike fighter still in use today.
Localization: English
Free disk space is required: 3.5 Gb
Requires DCS World version 2.9.10 or above!
The F-5E was developed in the early 1970s as a light tactical fighter. It is an upgraded version of the earlier F-5A. Combat roles of the F-5E include both air-to-air and unguided ground attack. In the United States, it has excelled as an aggressor. Given its mission flexibility, ease of operation, and low cost, the F-5E continues to serve air forces including Iran, Switzerland, and others.
The F-5Е is armed with two 20 mm М39-А3 cannons, each with 280 rounds. The cannons are in the nose section and include deflectors that direct hot gas away from the engine inlets. Each cannon has a firing rate of 1,500 to 1,700 rounds per minute.
Wingtips incorporates a launcher rail capable of firing AIM-9 infrared-guided missiles.
Localization: English, Russian
Free disk space is required: 2.53 Gb
Requires DCS World version 2.9.5 or above!
The F-4 Phantom II is an American two-seat, twin-engine, all-weather, long- range supersonic jet interceptor and fighter-bomber originally developed by McDonnell Aircraft for the United States Navy. After entering service with the Navy in 1961, it became adopted by the United States Marine Corps and United States Air Force. Due to its high adaptability, versatility and for its time, unparalleled capabilities, it quickly turned into the main workhorse for all 3 branches and spread beyond the borders of the United States, going on to serve and protect 12 nations across the world, with Phantoms still in operation today. Its production ran from 1958 to 1981, and with nigh 5200 Phantoms built, it became the most produced supersonic US military aircraft in the history, solidifying its place as one of the most recognizable and well known aircraft of the cold war era.
Localization: English
Free disk space is required: 8 Gb
One of the deadliest air superiority fighters of WW2, the Fw 190A-8 ‘Anton’ also punched above its weight for the Luftwaffe as a bomber-killer, fighter-bomber and night fighter. Armed with four wing-mounted MG 151 20 mm cannons and two nose-mounted 13 mm MG 131 machine guns, the single-seat Anton bit really hard in a scrap.
Combined with the Fw 190 A-8’s speed, rates of climb and dive and all-round agility, this fearsome amount of firepower gave Allied pilots a real challenge. Even the P-51D Mustang and the Mk.IX Spitfire struggled to match it in a dogfight. When they did land rounds on it, the Anton’s side and rear cockpit armour and armoured engine cowling made it harder to down.
The Christen Eagle II, which later became the Aviat Eagle II in the mid-1990s, is an aerobatic biplane aircraft that has been produced in the United States since February 1977.
Designed by Frank Christensen, a veteran WW2 P-51D pilot and aerobatic competitor, it was originally built to compete with the Pitts Special. You’ll find that the Eagle is hard to beat in terms of flying excitement and adventure, and yet the ease of control allows even average pilots to feel like masters of aerobatics.
DCS: Black Shark 3 is a further development of the well-known Black Shark and Black Shark 2 projects, which are dedicated to the Russian Ka-50 attack helicopter.
The Ka-50 is the world's only single-seat coaxial combat helicopter. It can effectively perform anti-tank missions, provide close air support and hit point targets on the battlefield with a wide range of weapons.
