Requires DCS World version 2.5.5 or above!
One of the deadliest air superiority fighters of WW2, the Fw 190A-8 ‘Anton’ also punched above its weight for the Luftwaffe as a bomber-killer, fighter-bomber and night fighter. Armed with four wing-mounted MG 151 20 mm cannons and two nose-mounted 13 mm MG 131 machine guns, the single-seat Anton bit really hard in a scrap.
Combined with the Fw 190 A-8’s speed, rates of climb and dive and all-round agility, this fearsome amount of firepower gave Allied pilots a real challenge. Even the P-51D Mustang and the Mk.IX Spitfire struggled to match it in a dogfight. When they did land rounds on it, the Anton’s side and rear cockpit armour and armoured engine cowling made it harder to down.
The A-8 could also be loaded with unguided rockets and bombs, including the giant, Werfer-Granate 21 cm spin-stabilised rocket. This delivered a 40.8 kg (90 lb) warhead with a lethal blast area of about 30 metres (100 ft). Launched into massed Allied bomber fleets by packs of Antons, where they didn’t actually bring down the bombers, these mighty munitions forced the tight formations to split, leaving individual aircraft open to attack.
A powerful BMW 801D-2 14-cylinder radial engine gave the Anton a top speed of 654 km/h (408 mph) and an initial climb rate of 720 m (2,363 ft) per minute.
Strong, wide-track undercarriage allowed the Fw 190A-8 to operate from rough front-line airfields. More than 6,650 Fw 190 variants were produced in the last two years of the war. Many of the Luftwaffe's aces racked up their impressive victory counts in the Anton, but you can match it in the Spitfire Mk IX. Try both and see who comes out on top.
Key features:
Free disk space is required: 1.46 Gb
Minimum system requirements (LOW graphics settings): OS 64-bit Windows 10; DirectX11; CPU: Intel or AMD 3.0Ghz+ with 4+ cores; RAM: 16 GB; Free hard disk space: 200 GB; Discrete video card NVIDIA/AMD 6GB; requires internet activation.
Recommended system requirements (HIGH graphics settings): OS 64-bit Windows 10/11; DirectX11; CPU: Intel or AMD 4.5Ghz+ with 8+ cores; RAM: 32+ GB ; Free hard disk space: 500 GB on Solid State Drive (SSD) + extra space for paid content ; Discrete video card NVIDIA/AMD with 8GB+ VRAM; Joystick / Pedals; requires internet activation.
Recommended VR systems requirements (VR graphics settings): OS 64-bit Windows 10; DirectX11; CPU: Intel or AMD 4.5Ghz+ with 8+ cores; RAM: 32+ GB; Free hard disk space: 500 GB on Solid State Drive (SSD); Discrete video card NVIDIA/AMD from 16GB+ VRAM; Joystick / Pedals / VR; requires internet activation.
This product can be downloaded and installed through the DCS World Module Manager. If you do not have DCS World installed, you can download the DCS World web-installer by clicking this link.
Requires DCS World version 2.5.6 or above!
August, 1944. You arrive to Merville-Calonne to take over the leadership of 7./JG26 flying Focke Wulf 190A-8s. Most of the pilots are mere teenagers with only a few flying hours, and your job is to turn them into an efficient fighting unit under the ever-increasing pressures of the war. The Western-Allies have gained complete air superiority over the continent, and their ground forces are advancing rapidly through France. Experience the thrill of attacking large bomber formations head-on, or the terror of taking off amid the bullets of low flying Mustangs. Escort bombers to their target across the hazy Channel, or strafe enemy vehicles advancing relentlessly towards Germany. Join the last of the Jagdfliegers as they fight desperately day after day in the final months of the Third Reich.
Localization: English
Requirements:
Requires DCS World version 2.8.6 or above!
The F-15E, developed in the mid 1980's, is a dual-role fighter designed to perform air-to-air and air-to-ground missions. An array of avionics and electronics systems give the F-15E the capability to fight at low or high altitude, day or night, and in all weather. The F-15E is the USAF's premier strike fighter still in use today.
Localization: English
Free disk space is required: 3.5 Gb
Requires DCS World version 2.9.5 or above!
The F-4 Phantom II is an American two-seat, twin-engine, all-weather, long- range supersonic jet interceptor and fighter-bomber originally developed by McDonnell Aircraft for the United States Navy. After entering service with the Navy in 1961, it became adopted by the United States Marine Corps and United States Air Force. Due to its high adaptability, versatility and for its time, unparalleled capabilities, it quickly turned into the main workhorse for all 3 branches and spread beyond the borders of the United States, going on to serve and protect 12 nations across the world, with Phantoms still in operation today. Its production ran from 1958 to 1981, and with nigh 5200 Phantoms built, it became the most produced supersonic US military aircraft in the history, solidifying its place as one of the most recognizable and well known aircraft of the cold war era.
Localization: English
Free disk space is required: 8 Gb
Requires DCS World version 2.9.10 or above!
The F-5E was developed in the early 1970s as a light tactical fighter. It is an upgraded version of the earlier F-5A. Combat roles of the F-5E include both air-to-air and unguided ground attack. In the United States, it has excelled as an aggressor. Given its mission flexibility, ease of operation, and low cost, the F-5E continues to serve air forces including Iran, Switzerland, and others.
The F-5Е is armed with two 20 mm М39-А3 cannons, each with 280 rounds. The cannons are in the nose section and include deflectors that direct hot gas away from the engine inlets. Each cannon has a firing rate of 1,500 to 1,700 rounds per minute.
Wingtips incorporates a launcher rail capable of firing AIM-9 infrared-guided missiles.
Localization: English, Russian
Free disk space is required: 2.53 Gb
