MATRIC panel for the VNAO T-45C Goshawk with the DEP, both MFDs, and most of the mappable systems needed to get the plane off the ground and back down again
I've created 2 MATRIC panels for the VNAO T-45C Goshawk. These are "passive panels" i.e. they only send commands to DCS, there is no update of aircraft information or state from DCS-BIOS (I will work on this in the future). For all the panels you'll need to either change your DCS key bindings to match mine or change the hotkeys in MATRIC to match your key binding. The 2 panels are:
1 - A small panel (7x4 grid) designed for phones and small tablets (< 8") with the T-45C DEP
2 - A large panel (20x12 grid) designed for larger tablets (ideally > 10.5") with the DEP, both MFDs, and most of the mappable systems needed to get the plane off the ground and back down again
--------------------------
TERMS & CONDITIONS
--------------------------
1. This is freeware provided as-is for the DCS user community. Note that the author is not affiliated with Touch Portal and does not gain anything financially from the said company.
2. The author will not be liable for any issues, problems, losses and/or damages arising from the use of this freeware.
3. The Touch Portal page may be modified and/or redistributed freely without any restriction.
4. The act of downloading, installing and/or using this freeware automatically constitutes acknowledgement and consent to the terms and conditions outlined above.
REQUIREMENTS
------------------
* DCS World 2.7 and above
* Touch Portal on Windows 10/11 - v3.0 and above (free) -
https://www.touch-portal.com/
* Touch Portal on tablet/phone - v2.3 and above (sorry, need the Pro upgrade for for the large page size)
----------------
INSTALLATION
----------------
1. Download and unzip file
2. Double click on the .deck file to import it MATRIC
------------------
KNOWN ISSUES
------------------
For now this is a purely passive dashboard - it can only send commands to DCS, it can't receive aircraft flight information or state information via DCS-BIOS.
I have tried to map as many of the T-45C functions as i can, however, there are a few things that I would have liked to map but that the module doesn't allow key mappings for:
- radio/tacan/ILS functions
- barometric altitude adjustment dial
- pitot/engine heat
- clock functions
- most of the cockpit lighting
---------------
CHANGELOG
---------------
* 2023-02-28: First version
