MATRIC panel for CK37 computer interface on the AJS37 Viggen
I’ve created a MATRIC deck to emulate the CK37 computer interface on the Viggen. This is a 6x8 size deck so works best on a ~10 inch tablet with a 4:3 ratio screen. It can be shrunk down a bit to make it fit better on smaller tablets or those with 16:9 ratio tablets like Android ones.
I’ve got push buttons for the 7 position rotary dial but the data entry buttons and waypoint buttons are as per the cockpit. You’ll need to create mappings for all of these in DCS as by default the module doesn’t have any keybindings for these buttons.
I’ve used the following key-binds:
Data entry 1-9 + 0 + Clear = Left Alt + Right Ctrl + [Q to P]
Navigation Waypoint buttons B1-B9 + Bx + LS + MAL = Left Alt + Right Ctrl + [0 to =]
Rotary dial = Left Alt + Rigt Ctrl + [A to J]
Input/ouput = Left Alt + Right Ctrl + [K/L]
I've also added buttons to bring up the kneeboard and navigate through the pages since its often necessary to pull information from the kneeboard to enter into the CK37
--------------------------
TERMS & CONDITIONS
--------------------------
1. This is freeware provided as-is for the DCS user community. Note that the author is not affiliated with MATRIC and does not gain anything financially from the said company.
2. The author will not be liable for any issues, problems, losses and/or damages arising from the use of this freeware.
3. The MATRIC page may be modified and/or redistributed freely without any restriction.
4. The act of downloading, installing and/or using this freeware automatically constitutes acknowledgement and consent to the terms and conditions outlined above.
REQUIREMENTS
------------------
* DCS World 2.7 and above
* MATRIC on Windows 10/11
* MATRIC on tablet/phone
----------------
INSTALLATION
----------------
1. Download and unzip file
2. Double click on the .deck file to import it MATRIC
---------------
CHANGELOG
---------------
* 2024-01-02: First version
* 2024-01-03: Corrected the order of navigation buttons B6 - B9
