dictionary = 
{
    ["DictKey_ActionText_112"] = "",
    ["DictKey_ActionText_170"] = "Move the ground set handle to the down position.",
    ["DictKey_UnitName_85"] = "Tarwara Unit #001",
    ["DictKey_WptName_185"] = "",
    ["DictKey_ActionText_162"] = "This concludes the startup tutorial, you may now taxi to the runway and take off and follow a flight plan or press ESC to exit this tutorial.",
    ["DictKey_sortie_4"] = "Startup Tutorial",
    ["DictKey_WptName_168"] = "",
    ["DictKey_ActionText_66"] = "Press ignition switch, wait for the engne to spool up to 10% and then move the throttle to GROUND IDLE position.\
\
Once RPM reaches 60%,press the spacebar to continue...",
    ["DictKey_ActionText_120"] = "Move the engine start switch forward to start the engine. All external and internally ligthing will switch off until desired engine idle RPM is reached. ",
    ["DictKey_WptName_189"] = "",
    ["DictKey_GroupName_8"] = "Ground Crew",
    ["DictKey_WptName_19"] = "",
    ["DictKey_ActionText_68"] = "Set UHF Radio to manual mode.",
    ["DictKey_UnitName_152"] = "HAWK Squadron Pilot #001",
    ["DictKey_ActionText_122"] = "Wait for the engine RPM to reach 10% before moving the throttle slightly forward out of idle.\
\
Press the spacebar to continue once the engine reaches 29%...",
    ["DictKey_ActionText_91"] = "We need power to operate the cockpit lights, so request ground power by using the comms menu.\
\
Press \\ , then F8, followed by F2, and finailly F1\
\
When the ground crew confirm ground power is on, press spacebar to continue...",
    ["DictKey_ActionText_160"] = "Set the INS to NAV.",
    ["DictKey_ActionText_132"] = "Flip the Q-Feel switch (right click).",
    ["DictKey_UnitName_39"] = "Ground Crew Unit #002",
    ["DictKey_ActionText_78"] = "Radar Altimeter Power switch - MARCHE (ON)",
    ["DictKey_ActionText_106"] = "Set the external light mode to NORM (right click twice).",
    ["DictKey_ActionText_158"] = "On the left MPCD select the EHSD option and on the right MPCD select the ENG option.\
\
Press spacebar when you are ready to continue...",
    ["DictKey_ActionText_128"] = "Turn on the SAS yaw, SAS Roll and SAS pitch (right click).",
    ["DictKey_WptName_88"] = "",
    ["DictKey_ActionText_11"] = "Welcome to the AV-8B N/V Startup Tutorial.  Follow all instructions when promted.",
    ["DictKey_WptName_83"] = "",
    ["DictKey_ActionText_140"] = "Set the RWR to ON (right click).",
    ["DictKey_ActionText_172"] = "Before taxing disengage the parking brake.",
    ["DictKey_ActionText_50"] = "Close the starter cover",
    ["DictKey_ActionText_110"] = "Turn on the postion lights, anti-collision lights and the external auxirlary lights (right click each one once).",
    ["DictKey_ActionText_93"] = "Adjust the cockpit lighting as desired.\
\
Press spacebar when ready to proceed...",
    ["DictKey_UnitName_102"] = "",
    ["DictKey_UnitName_154"] = "HAWK Squadron Pilot #002",
    ["DictKey_UnitName_9"] = "Ground Crew Unit #001",
    ["DictKey_ActionText_35"] = "Flip open the starter cover.",
    ["DictKey_ActionText_124"] = "Before engine start, close the canapoy (L-CTRL C).",
    ["DictKey_ActionText_130"] = "",
    ["DictKey_ActionText_89"] = "Engage the fuel proportioner (right click).",
    ["DictKey_ActionText_64"] = "Set UHF Radio to 127.00 using the rotaries.",
    ["DictKey_WptName_86"] = "",
    ["DictKey_ActionText_60"] = "As you can see it is dark out, so turn on the flash light (L-ALT+L)\
\
Press the spacebar when you are ready to proceed...",
    ["DictKey_ActionText_116"] = "Adjust the formation lights as desired.\
\
Presss spacebar when ready to continue....",
    ["DictKey_GroupName_151"] = "HAWK Squadron",
    ["DictKey_WptName_21"] = "",
    ["DictKey_ActionText_95"] = "Start the left and right fuel pumps (right click).",
    ["DictKey_ActionText_56"] = "Set UHF Radio to 127.00 using the rotaries.\
\
Once set press the spacebar to continue....",
    ["DictKey_ActionText_108"] = "Turn on the taxi light.",
    ["DictKey_descriptionText_1"] = "This is a fast and dirty startup tutorial for the early access release of the AV-8BN/A. Please note that this is not an accurate startup procedure and some things have been left out, may be irrelevant or in the wrong sequence once the module leaves early access.",
    ["DictKey_ActionText_31"] = "Left and Right Low-Pressure Fuel Pumps (Pompe Basse-Pression Gauche et\
Droite) – Set to MARCHE (ON)",
    ["DictKey_ActionText_27"] = "Turn on the taxi light (right click once).",
    ["DictKey_WptName_166"] = "",
    ["DictKey_WptName_182"] = "",
    ["DictKey_WptName_101"] = "",
    ["DictKey_ActionText_143"] = "Set the ECM to Standby (right click).",
    ["DictKey_ActionText_76"] = "Radar Altimeter Power switch - MARCHE (ON)",
    ["DictKey_GroupName_84"] = "Tarwara",
    ["DictKey_UnitName_100"] = "",
    ["DictKey_UnitName_6"] = "Trainee Pilot",
    ["DictKey_WptName_105"] = "",
    ["DictKey_ActionText_42"] = "Set the Nozzle to 10%.",
    ["DictKey_ActionText_126"] = "",
    ["DictKey_UnitName_104"] = "",
    ["DictKey_WptName_87"] = "",
    ["DictKey_WptName_157"] = "",
    ["DictKey_ActionText_40"] = "Press ignition switch, wait for the engne to spool up to 10% and then move the throttle to GROUND IDLE position, to allow the engine to spool up to 60%. (Ground idle is near the red engine shut off button)\
\
Once RPM reaches 60%,press the spacebar to continue...",
    ["DictKey_ActionText_145"] = "Turn on the left and right MPCD (Middle mouse wheel).",
    ["DictKey_WptName_153"] = "",
    ["DictKey_ActionText_46"] = "Activate the navigation lights.",
    ["DictKey_WptName_186"] = "",
    ["DictKey_ActionText_52"] = " Emergency Hydraulic Pump (Électropompe) switch – ON (FWD)",
    ["DictKey_ActionText_33"] = "Set starter fuel pump (POMPE DÉMARRAGE) to MARCHE (ON)",
    ["DictKey_WptName_10"] = "",
    ["DictKey_ActionText_58"] = "Move the fuel shutoff level to ON. and flip the DECS Switch to ON (right click).",
    ["DictKey_ActionText_70"] = "Swtich Amplis to 1, and then contact ATC for starup clearance using \\, then  F5, the  F3\
\
\
Once clearance has been given press spacebar to continue....",
    ["DictKey_WptName_20"] = "",
    ["DictKey_descriptionRedTask_2"] = "",
    ["DictKey_WptName_7"] = "",
    ["DictKey_UnitName_103"] = "",
    ["DictKey_UnitName_183"] = "AH-64D Pilot #002",
    ["DictKey_GroupName_5"] = "Trainee Pilot",
    ["DictKey_WptName_190"] = "",
    ["DictKey_UnitName_82"] = "Ground Crew Unit #002",
    ["DictKey_GroupName_99"] = "",
    ["DictKey_WptName_176"] = "",
    ["DictKey_WptName_17"] = "",
    ["DictKey_GroupName_80"] = "Ground Crew",
    ["DictKey_WptName_177"] = "",
    ["DictKey_ActionText_97"] = "Turn on the taxi light.",
    ["DictKey_UnitName_16"] = "M-2000C Pilot #003",
    ["DictKey_ActionText_72"] = "Ignition/Ventilation selector – set to VENTILATION",
    ["DictKey_WptName_14"] = "",
    ["DictKey_GroupName_12"] = "AV-8B N/A",
    ["DictKey_ActionText_134"] = "Swtich the RPS trim on (right click once).",
    ["DictKey_WptName_165"] = "",
    ["DictKey_ActionText_48"] = "Move the engine start switch forward to start the engine (right click). ",
    ["DictKey_ActionText_37"] = "Press start button to start engines, monitor the RPM's.",
    ["DictKey_ActionText_114"] = "Turn on the taxi light.",
    ["DictKey_UnitName_181"] = "AH-64D Pilot #001",
    ["DictKey_WptName_164"] = "",
    ["DictKey_ActionText_62"] = "First thing to be done to turn on the battery (right click once).",
    ["DictKey_ActionText_44"] = "Switch on the formation lights.",
    ["DictKey_WptName_156"] = "",
    ["DictKey_ActionText_54"] = "Press ignition switch, wait for the engne to spool up to 10% and then move the throttle to GROUND IDLE position.\
\
Once RPM reaches 60%,press the spacebar to continue...",
    ["DictKey_UnitName_15"] = "M-2000C Pilot #002",
    ["DictKey_ActionText_25"] = "Now turn on the generator (right click once).",
    ["DictKey_ActionText_174"] = "Switch on the oxygen.",
    ["DictKey_ActionText_29"] = "Set the Ignition/Ventilation selec to to either VENTILATION, GAUCHE (left) or DROITE (right).",
    ["DictKey_WptName_187"] = "",
    ["DictKey_UnitName_81"] = "Ground Crew Unit #001",
    ["DictKey_ActionText_149"] = "Set the HUD Altitude switch to RDR (right click once).",
    ["DictKey_ActionText_136"] = "Turn on the Anti-skid (right click once).",
    ["DictKey_ActionText_23"] = "First thing to be done is set the Parking Brake.",
    ["DictKey_descriptionBlueTask_3"] = "Follow the instructions.",
    ["DictKey_WptName_18"] = "",
    ["DictKey_WptName_167"] = "",
    ["DictKey_ActionText_74"] = "VTH/HUD (Heads-Up Display) power switch – MARCHE\
(ON) and VTB/HDD (Heads-Down Display) power\
switch – MARCHE (ON)",
    ["DictKey_WptName_188"] = "",
    ["DictKey_WptName_155"] = "",
    ["DictKey_ActionText_118"] = "Disable the Master Caution Warning by clicking on it.\
\
Wait for the engine RPM to reach 9.2% before moving the throttle slightly forward out of idle stop position.\
\
Once the engine stabilizes around 28.5% - 29.5%, contact the ground crew ( \\ , F8, F2, F2) to disconnect the ground power and then press the spacebar to continue...",
    ["DictKey_GroupName_180"] = "AH-64D",
    ["DictKey_WptName_184"] = "",
    ["DictKey_ActionText_138"] = "Power up the flaps (right click once).",
    ["DictKey_UnitName_13"] = "AV-8B N/A Pilot #001",
    ["DictKey_ActionText_147"] = "Turn on the HUD (Middle mouse wheel).",
} -- end of dictionary
