Hi all,
This profile is based on DCS-BIOS Plugin

To use this profile you need to:
- Install & setup DCS BIOS (https://dcs-bios.readthedocs.io/en/latest/installation.html)
- Install DCS-BIOS plugin for StreamDeck (https://github.com/toureiffel/streamdeck-dcs)

Automatic startup How-To-Use instrucions
- open a F/A-18C COLD&DARK situation
- press START 1
- When RIGHT ENG RPM reaches 25%, then (press RSHIFT+HOME or) move Right thottle from OFF detent to the IDLE detent. R Eng RPM should raise up as normal procedure
- when REng RPM reaches 60-65% you can press START 2 (choose field or carrier button, depending on your situation)
- When LEFT ENG RPM reaches 25%, then (press RALT+HOME or) move Right thottle from OFF detent to the IDLE detent. R Eng RPM should raise up as normal procedure

That is done! 
after START 2 actions completed, you will also have INS Switch already set to NAV (and inertial alligment correctly completed, since you choose the right START2 button for your situation Carrier/Field ;))

(Of course you can customize START-1 and START-2 actions: if you like you can remove/add actions, change order, just do it using streamdeck software)

Now you can go through and..
- Switch int/ext lights as desired
- set FCS
- HSI
- Rearm & Refuel
etc..


----

GENERAL NOTES:

button state on streamdeck are not bi-diretional synchronized with relative state in DCS (due to DCS-BIOS that does not read DCS buttons status; it only send actions)
So you will need to sync/allign manually once you start your mission (example: if in DCS the 'landing/taxi lights' are 'off' and in your streamdeck the button is 'on', you have to witch it off in your streamdeck to sync to DCS state)

some commands are based on Keyboard shortcut:
- open/close canopy
- Flash light
- NVG
- other functions not related to aircraft such as : briefing, menu radio, Track-ir, kneeboard etc..

remember to run StreamDeck Software with 'Administration rights' in order to let it work properly

THAT IS ALL FOLKS!
Hope you enjoy my profiles!

PVI Maverick
www.pvi.it

