Bell 47 Flyable Helicopter (EFM) 2.7 (Link working)
ALL CREDITS TO:
Upuart's and nibbylot's
https://forums.eagle.ru/topic/272270-bell-47-flyable-helicopter/?_fromLogin=1
DOWNLOAD LINK --->
https://drive.google.com/file/d/1NAMFRlymx3YU1TcjCMy0hrvLSMPkxcfc/view?usp=sharing
--------
Bell-47
--------
Original Model and Spray and stretcher code, upuart.
FM, Mod structure and EFM code nibblylot.
Gunner model Andy Woodhead
https://sketchfab.com/3d-models/us-marine-vietnam-1960s-free-download-7309cd1015bb4a70aeeb1aa64c32f0e8
Conversion by FreddyStoned and Hawkeye60
Thanks go out to upuart and nibblylot for their work and permissions.
Have fun!
Cheers!
==================================
Bell47 Cold Start Procedure
1. Power Selector Switch for battery (B) or ground power (LCTRL+B).
2. Hold Starter Switch (Home) until RPM is above 13%.
3. Push Thottle Idle cutoff (End) to allow fuel flow to start and continue holding Starter Switch until RPM reaches 58+%.
4. Turn on Generator and Inverter Switches or the battery will not charge.
5. Increase RPM to 100% by turning throttle (Page Up) or down (PageDown).
6. Do not keep RPM above 105% for prolonged periods, this will cause engine overheating.
N: Toggle Night Vision Goggles
LALT+L: Flashlight
1: Pilot Seat
2: Copilot Seat
- Gunner is NOT selectable.
- THE BELL47 CANNOT LAND ON WATER. The Floats are for display only.
- To fire using the gunner, you must click the "Cleared To Fire" switch.
- Gunner will fire where the pilot is looking (within his arc of fire).
Thanks!
