TM Hotas Cougar profile for DCS F-16C

Home > User Files > TM Hotas Cougar profile for DCS F-16C
DCS: World 2.5
F-16C Viper

TM Hotas Cougar profile for DCS F-16C

Caricata da - Rudel-Chw
Data - 07.10.2019 16:15:20
Foxy Profile for Thrustmaster HOTAS Cougar for the DCS F-16C

ThrustMaster Cougar Profile for DCS World F-16C
v1.3 by Rudel-Chw (Eduardo Ahumada, Antofagasta, Chile)

1.- Software:
Profile tested with DCS World 2.5.5; driver Thrustmaster 2007_HCO_Vista_64_RC1; Foxy 4.2

2.- Cougar Mode:
After downloading the Profile into the Cougar memory, make sure that on the Cougar Control Panel the mode "Button & Axis emulation" is ON (green).

3.- Where to put the Files:
Put the four files of this Profile, on the folder  Program Files (x86)\HOTAS\Files.

4.- Headtracking:
This Profile is designed to be used with a Headtracking device. It has no buttons setup for view control, except for Snapviews.

5.- Communications:
The Throttle Hat has been configured for Simple Radio PTT, Discord PTT, SR Sel ect Next Radio, VHF PTT and UHF PTT, in addition to DCS's Comm. Menu

6.- Rudder Pedals
Since I dont have Rudder pedals, I've designed this profile so that the ANT rotary can be assigned as Rudder, since it's easy to control using your thumb. Assign the Axis on Option-Controls within DCS. The Radar Antenna elevation is controlled by Hat3 (shifted with S3)

7.- Range Knob:
The top rotary is used to control TGP Zoom ... it's not an axis, so return to neutral once the desired zoom has been attained.

8.- DCS Simple Radio keybindings:

Define the following keybindings on DCS SR:

SR_Select_Next_Radio = {LCTL 0}

9.- Discord keybindings:

Define the following keybindings on Discord:

Discord_PTT = {LCTL 4}

10.- Headtracking & Custom Views:

Define the following keybindings on your headtracking software:

Headtracking_ON-OFF = {RCTL F9}

Define the following snapviews on DCS F-16:

KP8 = Closeup view of HUD
KP6 = Closeup View of Right DDI
KP4 = Closeup view of Left DDI
KP2 = Closeup view of Warning Panel

The snapviews are toggles, so press them again to exit the Snapview ... DON'T go fr om one Snapview directly to another, always toogle out before changing to another Snapview.

11.- DCS keyboard bindings:

Please define the following keyboard bindings on DCS -> Options -> Controls for the F-16C

HDG Set Knob - CCW/Decrease = LCTL + h
HDG Set Knob - CCW/Increase = LSHF + h
CRS Set / Brightness Control Knob - CCW/Decrease = LCTL + k
CRS Set / Brightness Control Knob - CW/Increase = LSHF + k
MAN RNG Knob - CW = LALT + r
MAN RNG Knob - CCW = LCTL + r
Countermeasures_Management_Switch-Aft = LCTL + m    
Countermeasures_Management_Switch-Fwd = LALT + m    
Countermeasures_Management_Switch-Left = LSHF + m    
Countermeasures_Management_Switch-Right = RCTL + m
Expand/FOV_Button-Depress = LCTL + f
Paddle_Switch-Depress = LCTL + p
Transmit_Switch-IFF_IN = {LCTL i}    
Transmit_Switch-IFF_OUT = {LCTL o}
Throttle Cutoff Release - Depress = LCTL + a

  • Licenza: Gratuito - Versione gratuita, non ridistribuire
  • Lingua: Inglese
  • Dimensione: 465.83 Kb
  • Scaricato: 1307
  • Commenti: 4
  • Commenti
Caricamento dei commenti...