Realistic checklist and a handy cockpit helper for the VNAO's freeware Goshawk.
DESCRIPTION
Here's a fairly realistic checklist for the T-45C Goshawk, a freeware mod created by VNAO and available here:
https://forums.eagle.ru/topic/203816-vnao-t-45-goshawk/
I took the original NATOPS checklist, and removed everything that is not yet implemented in the model, as well as all tests and passive checks. The rest has been slightly rearranged to better fit into the DCS environment. This checklist is intended for the front seat, and compatible with both the carrier and the shore ops.
It is recommended to bind the following actions to your HOTAS:
* Gas Turbine Starter Button (GTS) - located on the front face of the throttle grip, and can be hard to reach.
* Exterior lights master switch - this one is also hard to reach, located on the left side of the throttle grip.
* Engine Switch START - needs to be held during the engine start.
* Throttle Finger Lift - pressing it will move the throttle to idle, completing the start sequence.
And one more thing. If you're going to use the Goshawk in its natural habitat - i.e. on the boat - you might want to check out my CASE kneeboards:
https://www.digitalcombatsimulator.com/en/files/3314314/
HOW TO INSTALL
Extract the downloaded archive, then copy the "T-45" folder into your "Saved Games\DCS (or DCS.openbeta)\KNEEBOARD\" directory. You may need to create the "KNEEBOARD" folder if it doesn't exist.
CONTACT INFO
Created by Dima Kozyrev
dimkzr@gmail.com
If you found an error or have a suggestion, feel free to contact me via email or on ED's forums (Minsky).
