TM Hotas Cougar profile for DCS AJS37 Viggen

Home > User Files > TM Hotas Cougar profile for DCS AJS37 Viggen
DCS: World
AJS-37 Viggen
TM Hotas Cougar profile for DCS AJS37 Viggen

TM Hotas Cougar profile for DCS AJS37 Viggen

Author - Rudel-Chw
Date - 11.03.2017 09:31
ThrustMaster Hotas Cougar Profile for DCS AJS37 Viggen.
v1.1 (11/mar/2017) : Small adjustments to commands binded.

Software:
Profile tested with DCS World 1.5; driver Thrustmaster 2007_HCO_Vista_64_RC1; Foxy 4.2

Cougar Mode:
After downloading the Profile into the Cougar memory, make sure that on the Cougar Control Panel the mode "Button & Axis emulation" is ON (green).

Where to put the Files:
Put the four files of this Profile, on the folder  Program Files (x86)\HOTAS\Files.

Track IR
This Profile is designed to be used with TrackIR. It has no buttons setup for view control.

Rudder Pedals
Since I dont have Rudder pedals, I've designed this profile so that the ANT rotary can be assigned as Rudder, since it's easy to control using your thumb. Assign the Axis on Option-Controls within DCS.

Software Pre/requisites
For some reason, the default keyboard assignments of the Viggen is lacking a lot of bindings. Before using this Cougar profile, please read this Forum thread:

https://forums.eagle.ru/showthread.php?t=181720

And apply the changes that are contained on a zip file on the first post of the thread. Thanks to FunkyFranky for his work.

Special Functions of this Profile:

1) The "Dog Fight" button is used as a Radar Mode selector, rather than being used as a Cougar Mode selector like I do on other profiles.

2) Press simultaneously the buttons S3, S4 and the Trigger (TG2) of the Joystick, during half a second, to initiate the Eject sequence.

3) The Cougar has a dual contact trigger (TG1 and TG2), this Profile uses the first contact to release the weapon's safety bracket and the second contact to actually fire.

4) The throtle's Microstick is used to move the radar cursor. This function is affected by the keyboard timing parameters set on Windows; for best result set "Repeat Delay" to shortest and "Repeat Rate" to Fast (on Windows Control Panel -> Keyboard)

The microstick's button is used to toggle between the T1 and TV fixes; while the same button, shifted with S3, selects the T0 (off) fix.

5) The RNG rotary is used as a View Zoom Control rather than a Zoom Axis. Pressing down on the rotary, resets the Zoom to normal.

6) Couldnt get the Walkman Tape Player controls on a single Hat; so the player controls are on Hat4, while the volume is on Hat1.

Key bindings on DCS:

Several of the Viggen Commands dont have key assignments by default, so I was forced to make my own; so please check your DCS Control configuration and assign the following keys in order for this Profile to work as intended:

A0_Mode = {LALT a}
A1_Mode  = {RSHF a}    
A2_Mode_Three_position_switch  = {RALT RCTL a}

Autopilot_yaw_trim_Left = {RALT RCTL z}    
Autopilot_yaw_trim_Right = {RALT RCTL x}

Trigger_safety_bracket_ARM = {LCTL t}    
Trigger_safety_bracket_SAFE = {LALT LCTL t}

Reference_button = {LCTL LSHF r}    
Obstacle_detection_mode  = {LCTL h}
Reversal_off = {RSHF p}    
Reversal_on = {RALT p}    

Play = {LALT m}    
Stop = {RCTL m}    
Volume_Down = {LCTL v}    
Volume_Up = {LALT v}    

Seat_Adjustment-Down = {RCTL s}    
Seat_Adjustment-Up = {RALT s}    

Airbrake_out_force = {RALT b}
Airbrake_in  = {RSHF b}    

T0_Fix = {RCTL t}    
T1_Fix = {RSHF t}    
TV_Fix = {LCTL LSHF t}
  • License: Freeware - Free version, Unlimited distribution
  • Language: English
  • Size: 285.68 Kb
  • Downloaded: 995
  • Comments: 0
FOLLOW US