Single Player WW2 aircraft fixes

主页 > 用户文件 > Single Player WW2 aircraft fixes
DCS: World 2.5
其他

Single Player WW2 aircraft fixes

类型 - 模组
作者 - Stonehouse
日期 - 05.03.2019 03:23
Temporary fix for a few small typo's noticed in Spitfire, BF109, FW190D9 lua. It is intended as a placeholder until the development team has time to investigate and fix these few small things where verified by Yo-Yo and other ED experts that they are actually an issue. Only impacts AI flown aircraft.  

***HAS NO EFFECT ON HUMAN PILOTED AIRCRAFT, ONLY INTENDED FOR USE WITH OFFLINE OR PVE PLAY ***

This mod will break IC and therefore requires the use of a mod manager like JSGME to facilitate easy disablement and enablement of the mod so joining a MP server where IC is enforced is not a problem (simply disable the mod beforehand). Presented as JSGME ready. Updated to include FW190 changes in DCS 2.5.4.28090 Open Beta

***HAS NO EFFECT ON HUMAN PILOTED AIRCRAFT, ONLY INTENDED TO HELP OFFLINE OR PVE PLAY, WILL BREAK IC, REQUIRES MOD MANAGER ***

*** HUMAN PILOTED AIRCRAFT USE THE PFM AND ARE THEREFORE NOT CHANGED BY THESE SFM UPDATES. ONLY AI AIRCRAFT ARE HANGED***

Very minor changes to the Spitfire and FW190D9 and it is likely you will not notice any change in an AI flown Spitfire or FW190D9. The changes to the BF109K4 are a bit greater and should be able to be noticed for AI Bf109K4s. The main two changes of importance is the correction of the wing area to match the value given in the DCS World Encyclopaedia (currently the BF109K4 has slightly too large a wing area so would tend to have a little too much lift given to an AI pilot) and to upd ate the manifold pressures to match the values quoted in the Luftwaffe technical orders (see screenshot) for a Bf109-K4 1.8ata version of engine configuration (currently for the AI Bf109K4 they are all se t to 180000 pascals, this may be deliberate to suit something in the engine modelling but appears to be a temporary setup that has never been changed to the permanent values).

Values that have been changed are indicated in comments in the lua. Note that 1 ata does not = 1 atmosphere but instead converts as shown below. Temperature is also a factor but I have assumed the values below generally fit all situations and converted from ata to PSI and then to pascals and rounded the result.

            1 ata = 1 kg/cm squared
                 = 14.223343307119565 pounds per square inch
                 = 0.9678411053540588 atm or standard atmosphere
                 = 28.95902519867009 inches of Hg (0 degrees Celsius)
                 = 735.5592400690826 Torr or mm of Hg
  • 许可: 免费软件-免费版,无限制发布
  • 语言: 任何语言
  • 大小: 18.32 Kb
  • 下载数: 114
  • 评论: 0